MGP1612S Series Programmable Controller
The MGP1612S Series Controllers are rugged,
network centric, high performance multi-protocols
Input/Output controllers to accommodate general and
specific applications, featuring Modbus (RS-485,
TCP/IP), BACnet® (RS-485, IP and Ethernet), and
Sedona, plus a built-in Web server for easy
configuration.
Web Browser Configuration
Built-in Web server enables configuration with popular web browser over an Ethernet connection. I/O status can be monitored over the Internet connection.
Multi Protocols Support
Modbus, BACnet®, and Sedona are supported on the same controller which provides flexibility for implementation.
High-Speed Data Rates
Multiple serial communication (RS-485) speed selection from 9.6kbps to 115.2kbps. Supports Ethernet 10Base-T/100Base-T interface, half or full duplex.
As Bridge Controller
The controller can be configured as a Bridge Controller providing a network bridge for the Modbus Master in the Ethernet and serial communication (RS-485) via built-in protocol converter.
Device ID
Complementing existing standard protocols, the MGP1612 Series Controllers can be uniquely identified over the network. This facilitates online network device search and simplify reconfiguration.
Network Security
All configurations changes are protected via password setting, either through standard network protocol access (BACnet®) or web browser.
Multiple Input/Output Type
The controller has eight (8) Digital Inputs, eight (8) Analog Input for current, voltage, resistance and temperature sensor, eight (8) Digital Outputs (relay) and four (4) Analog Output (current and voltage).
High Accuracy Analog Channels
High speed 16-bits A/D converter with programmable gain amplifier yields a high resolution and accuracy reading on analog input points. 12-bits D/A provides more accurate analog output control.
Programmable / Standalone Functionality
The controller can be configured to operate as standalone device. Over 40 types of programmable functions are available, typically thermostat, PID, scheduler, conversion, timer, utilities, totaliser and etc.
Online Help / Information
All related information/helps are available through the controller web server. Information such as registers details, wiring diagram, device specification and etc are provided to assist the user.
Status Indicator
Operational activity on each individual channel of DOs are conveniently indicated by LED, so as the Power, Operation and Communication.
Reset & Broadcast Switch
A Reset Switch has been provided for system reset without power removal (Warm Start operation). The Broadcast Switch allows the controller to broadcast itself to the network during installation and implementation.
Firmware Upgrade / Configuration
The controller firmware can be upgraded either through RS-485 or Ethernet connection. Network communication and operation parameters can be changed via RS-485/Ethernet with the built-in boot-loader and terminal program.
Robust System Operation
The controller has a built-in High Accuracy Real Time clock with backup super capacitor (1 week maximum). Software and hardware watchdog timer are provided for high reliability operation.
Ease of Installation
All I/Os are connected via field removable terminal block connectors for easy maintenance. The controller casing fits standard DIN rail mounting.
Processor
• Cortex-M7 @ 528MHz
• Memory: RAM 32MB, Flash 4MB, EEPROM 64kB
Inputs & Outputs
Analog Input:
• 8 Channels (16-bits Resolution)
o 16-bits Resolution Specification
▪ Voltage: 0 – 10V (± 0.001V), 0 – 5V (± 0.0005V)
▪ Current: 0 – 20mA (± 0.005mA), 4 – 20mA (± 0.005mA)
▪ Resistance: 0 – 120k (± 15Ω), 0 – 30k (± 5Ω),
0 – 10k (± 2Ω), 0 – 1.5k (± 1Ω)
▪ Thermistor: 10k, 10k Shunt, 1k Balco, 1k Platinum
(All ± 0.03°C)
Analog Output:
• 4 Channels (12-bits Resolution)
o Voltage: 0 – 10V (± 0.003V)
o Current (up to 750Ω load): 0 – 20mA, 4 – 20mA (± 0.01mA)
Digital Input:
• 8 Channels
o Type: Voltage Free
o Limit: +24V at 500Ω maximum
Digital Output:
• 8 Channels
o Relay Contacts, SPST NO, Pilot Duty
▪ Rating @ 250VAC/30VDC: 5A
▪ Life expectancy Electrical: 200,000
Supply Connection & Environmental Limits
• Power Supply: 24VAC ± 5% or 24 VDC ± 5%
• Consumption: 3.6VA max or 300mA max
• Operating Temperature: 32° to 150° F (0° to 65° C)
• Storage Temperature: -4° to 150° F (-20° to 65° C)
• Operating Humidity: 10% to 95% HR (non-condensed)
Status Indicators
• Power Status LED
• Operation Status LED
• Communication Status LED
• Digital Output Status LEDs
Communication
Physical Interface 1 (Port 1):
• EIA-485 Standard (Bus A, B) two-wire
• Half Duplex
• Data Bit: 8 bits
• Application Protocol:
o Modbus Slave
▪ Baud Rate Speed: 9.6k, 19.2k, 38.4k, 57.6k, 115.2k bit/s
o BACnet® MSTP
▪ Baud Rate Speed: 9.6k, 19.2k, 38.4k, 76.8k bit/s
o Sedona
• Multi-drop Capability: Yes (Hardware ID Setting)
Physical Interface 2 (Port 2):
• Ethernet 10/100 Base-T
• Ethernet Support: IP, TCP, UDP, ICMP, IGMP, FTP, HTTP
• Application Support: Modbus, BACnet® IP, BACnet® Ethernet, Sedona
Physical Interface 3 (Port 3):
• EIA-485 Standard (Bus A, B) two-wire
• Half Duplex
• Data Bit: 8 bits
• Application Protocol:
o Modbus Master
▪ Baud Rate Speed: 9.6k, 19.2k, 38.4k, 57.6k, 115.2k bit/s
Compliance
• CE (EN 61326-1 2014/30/EU) & FCC
• BTL Certified (Revision 14)
Mechanical
• Dimension: 168mm (L) x 120mm (W) x 45mm (H)
• Material: UL94 ABS
• Weight: 390g
MGP1612B
This model is supplied with 16-bit A/D converter. It supports only the Modbus and BACnet® Protocol.
MGP1612S
This model is supplied with 16-bit A/D converter. It supports all the Modbus, BACnet® and Sedona.