MB0010

High-Speed Data Rates
Multiple serial communication (RS-485) speed selection from 9.6kbps to 115.2kbps.

Device ID
MB0010 Controller can be uniquely identified over the network. Device ID is set through specific Modbus register.

Network Security
All configurations changes are protected via password setting, either through standard network protocol access.

Status Indicator
Operational activity on each individual channel of DIs are conveniently indicated by LED, so as the Power, Operation and Communication.

Reset Switch
A Reset Switch has been provided for system reset without power removal (Warm Start operation).

Firmware Upgrade/Configuration
The controller firmware can be upgraded through RS-485 with the built-in bootloader. Network communication and operation parameters can be changed with Modbus register(s).

Robust System Operation
Software watchdog timer is provided for high reliability operation.

Ease of Installation
All I/Os are connected via field removable terminal block connectors for easy maintenance. The controller casing fits standard DIN rail mounting.

Inputs & Outputs
Digital Input:
• 10 Channels
o Type: Voltage Free
o Limit: +24V at 500Ω maximum

Supply Connection & Environmental Limits
• Power Supply: 24VAC ± 5% or 24 VDC ± 5%
• Consumption: 150mA max
• Operating Temperature: 32° to 150° F (0° to 65° C)
• Storage Temperature: -4° to 150° F (-20° to 65° C)
• Operating Humidity: 10% to 95% HR (non-condensed)

Status Indicators
• Power Status LED
• Operation Status LED
• Communication Status LED
• Digital Input Status LEDs

Communication
Physical Interface:
• EIA-485 Standard (Bus A, B) two-wire
• Half Duplex
• Data Bit: 8 bits
• Application Protocol:
o Modbus Slave
▪ Baud Rate Speed: 9.6k, 19.2k, 38.4k, 57.6k, 115.2k bit/s
• Multi-drop Capability: Yes (Software Device ID Setting)
• Integrated termination resistor, enable through Modbus register

Compliance
• CE & FCC (TBA)

Mechanical
• Dimension: 132mm (L) x 80mm (W) x 38mm (H)
• Material: ABS
• Weight: TBA